Fischer 567517, Flüssigkeit (gebrauchsfertig), 0,6 kg, Beton, Röhre, Grau, CE

The cost-efficient injection mortar for post-installed rebar connections.
Advantages
- The European Technical Assessment (ETA) permits post-installed rebar connection with rebars from Ø 8-32 mm and embedment depths up to 2 m.
- The short processing and curing times ensure fast working progress.
- Processing in different substrate temperatures from -10°C to +40°C allows universal use.
- The injection mortar Rebar Connect FIS RC II allows flexible application with hollow or hammer drills.
- In addition, the FIS RC II is approved for post-installed rebar connections with a service life of 100 years.

The fischer RebarConnect FIS RC II injection mortar is the economical choice for post-installed rebar connections. With the injection system, Ø 8-32 rebar connections with an anchoring depth of up to 2 metres can be carried out. In combination with the matching hollow drill, borehole cleaning is no longer required as an additional work step for fast installation. The processing of the FIS RC II is regulated from -10°C to +40°C in the ETA.

Functionality
- Resin and hardener are stored in two separate chambers and are only mixed and activated in the static mixer when the injection cartridge is ejected.
- In combination with the suitable hollow drill, there is no need for drill hole cleaning.
- The injection cartridges can be applied quickly and with minimum effort using the fischer dispenser.
- The reinforcement bar is set by hand with a slight rotating movement down to the bottom of the drill hole.
- The mortar fully bonds the reinforcement bar to the drill hole wall and seals the borehole.
- Opened cartridges can be reused by changing static mixers.